Saturday, 15 December 2001

 

Room 1

10:40-12:20

A4-1: Design for X (2)

  1. The Conflict of Contradictory Environmental Targets
    Conrad Luttropp, Reine Karlsson, KTH, Sweden
  2. Life Design for Remanufacturing Durable Products
    Susumu Okumura1 , Toshimitsu Morikuni2 , Norio Okino1 , 1 Univ. of Shiga Prefecture, Japan, 2 NEC Machinery, Japan
  3. Development of Recovery Indicators to Be Used during Product Design Process: Method, Potentialities and Limits
    Fabrice Mathieux1 , Daniel Froelich1 , Pierre Moszkowicz2 , 1 ENSAM Chambery, France, 2 INSA Lyon, France
  4. Treatment of Reliability for Reuse and Remanufacture
    Takeshi Murayama1 , Lily H. Shu2 , 1 Hiroshima Univ., Japan, 2 Univ. of Toronto, Canada
  5. EcoDesign for Product Variety: A Multi-Objective Optimization Framework
    Suiran Yu, Satoru Kato, Fumihiko Kimura, The Univ. of Tokyo, Japan

13:20-15:20

A4-2: Tools for DfX

  1. Life-cycle Design System for Machined Parts -- Linkage of LCI Data to CAD/CAM Data
    Shoji Nawata, Tojiro Aoyama, Keio Univ., Japan
  2. Development of Recyclability Evaluation Tool
    Naohiko Oyasato, Hideki Kobayashi, Kazuhito Haruki, Toshiba, Japan
  3. Recycling Oriented Design -- A Case Study on House Appliances Using the Software ATROiD
    Hong-Yoon Kang 1 , Jang-Woo Jung 1 , Christoph Herrmann 2 , 1 LG Production Engineering Research Center , Korea, 2 IWF, Technical Univ. Braunschweig , Germany
  4. Recyclability Evaluation Method (REM) and Its Applications
    Yuzo Hiroshige, Takayuki Nishi, Toshijiro Ohashi, Hitachi, Japan
  5. Approximate Life Cycle Assessment of Classified Products Using Artificial Neural Network and Statistical Analysis in Conceptual Product Design
    Ji-Hyung Park1 , Kwang-Kyu Seo1 , David R. Wallace2 , 1 Korea Inst. of Science and Technology, Korea, 2 MIT, USA
  6. DfE Tools -- A Way for Application of LCA in Product Design?
    Michael Betz, Harald Florin, Kaufm. H. Schöch , PE Product Engineering, Germany

 

Room 2

11:20-12:40

A4-3: LCA Case Studies

  1. Life Cycle Assessment of Third Generation (3G) Wireless
    Telecommunication Systems at Ericsson
    Jens Malmodin, Lisa Oliv, Pernilla Bergmark, Ericsson Radio Systems , Sweden
  2. Generic LCA Based DfE -- A Case Study of Different PWB Systems
    Constantin Herrmann1 , Michael Betz2 , Niels Warburg1 , 1 Univ. of Stuttgart,
    2 PE Product Engineering, Germany
  3. Ecological Improvement of the Vending Machine Using LCA Method
    Yukio Kimura1 , Seizo Kato2 , Naoki Maruyama2 , Yucho Sadamichi2 , Anugerah Widiyanto2 , Yoshitaka Joukaku2 , 1 Fuji Electric, 2 Mie Univ., Japan
  4. LCA of Machine Tools with Regard to Their Secondary Effects on Quality of Machined Parts
    Javad Akbari, Keigo Oyamada, Yoshio Saito, Tokyo Inst. of Technology, Japan

13:40-15:20

A4-4: Design for Disassembly

  1. Product's Disassemblability Evaluation Using Information Entropy
    Hideo Fujimoto, Alauddin Ahmed, Kazuaki Sugi, Nagoya Inst. of Technology, Japan
  2. Design of Heat-Activated Reversible Integral Attachments for Product-Embedded Disassembly
    Ying Li, Kazuhiro Saitou, Noboru Kikuchi, Steven J. Skerlos, Panos Y. Papalambros, The Univ. of Michigan, USA
  3. A Design for Recycling Technique for Optimizing Resource Circulation Characteristics of Products
    Yasuo Kondo, Ko-suke Hirai, Fumio Obata, Tottori Univ., Japan
  4. Development of Disassembly Support System for Mechanical Parts and Its Application to Design Considering Reuse/Recycle
    Hidefumi Wakamatsu, Akira Tsumaya, Keiichi Shirase, Eiji Arai, Osaka Univ., Japan
  5. Design for Re-Use and Disassembly
    Martina Hoffmann, Bernd Kopacek, Reinhard Knoth , Austrian Society for Systems Engineering and Automation, Austria

 

Room 3

10:00-11:00

E4-1: Social System Design (1)

  1. Analyzing Sustainability of Circulatory System by Using the Rewriting System
    Kotaro Kakimoto , Takayuki Shiose , Toshiharu Taura , Kobe Univ. , Japan
  2. Indirect Control Methods for Navigating the Agent-Based Recycle Society
    Takayuki Shiose, Kouji Yokoyama, Toshiharu Taura, Kobe Univ., Japan
  3. From a Factory to a Person: One Approach for Sustainable and Service-Oriented Manufacturing Scheme
    Masahiko Onosato1 , Nydia Suppen1 , Koji Teramoto1 , Kazuaki Iwata2 , 1 Osaka Univ., 2 International Inst. of Advanced Studies, Japan

11:20-12:40

E4-2: Social System Design (2)

  1. Integrated Product Policy (IPP) and Eco-Product Development (EPD) (Keynote)
    Martin Charter, The Centre for Sustainable Design, The Surrey Inst. of Art and Design, Univ. Coll. ,UK
  2. Design and Evaluation of the Recycle of Home Appliances: An Application of Market Microstructure Theory
    Kanji Ueda1 , Nariaki Nishino1 , Atsushi Iwasaki1 , Sobei H. Oda2 , Itsuo Hatono1 , 1 Kobe Univ., 2 Kyoto Sangyo Univ., Japan
  3. Demonstration of a Nature Symbiotic Office Designed for 100 Years Use
    Masanobu Nagano, Kochi Eco-Design Council , Japan

13:40-15:20

B4-1: Cleaner Processes and Energy-Saving Processes

  1. Development of Drying Technology Utilizing Solar Energy to Dry Agricultural and Marine Products
    Hidetoshi Aoki , Hachinohe Inst. of Technology, Japan
  2. On Process Planning with Multiple Agents: Environmentally Conscious Decisions among Feasible Process Plans
    Beth E. Allen, Univ. of Minnesota, USA
  3. 100% Ozone-Treatment System for Bath and Swimming Pool Water --CERAZONE
    Reiji Terao1 , Kazunori Mori1 , Masaki Matsui2 , 1 TERAO, 2 Gifu Univ., Japan
  4. Energy Saving Cleaner Technology for Conversion of Waste Pickle Liquor and Mill Scale
    Natteri M. Parthasarathy , SALN Coll. of Engineering & Management/ETK International Ferrites Ltd. , India
  5. Development of Hybrid Micro Machine Tool
    Tsuneo Kurita 1 , Shinya Watanabe 2 , Mitsuro Hattori 1 , 1 National Institute of Advanced Industrial Science and Technology (AIST) , 2 Disco Co. , Japan

9:40-10:40

E4-3: Labelling and Logistics

  1. Trial of Product Environmental Information System -- Canon Case (Type III Eco-Label, JEMAI Program Ver.2)
    Kiyofumi Matsumoto, Norihiro Mochizuki, Keizo Naganuma, Masaaki Oono, Canon, Japan
  2. Re-Use of End-of-Life Electronic Equipment and Components -- Logistic Aspects
    Reinhard Knoth, Martina Hoffmann, Bernd Kopacek, Peter Kopacek, Austrian Society for Systems Engineering and Automation, Austria
  3. Inverse Distribution System of Construction for Closed-Loop Construction System
    Hiroyuki Nakamura1 , Jun Shiino2 , 1 Shimizu, 2 Waseda Univ., Japan

11:00-12:40

Special Theme 9-4-1: Advanced Technology for Electronic Packaging:
JIEP Session (1)

  1. JIEP EcoDesign for Tomorrow (Keynote)
    Hidetaka Hayashi, Fujikura, Japan
  2. Conductive Adhesive for Plated Sn Electrode
    Michinori Komagata , Yukio Shirai , Noritsuka Mizumura , Kenichi Suzuki , NAMICS , Japan
  3. Development of Environmentally Friendly Epoxy-Resin Compounds without Toxic Flame Retardants and Their Application to Electronic Parts
    Yukihiro Kiuchi, Masatoshi Iji, NEC, Japan
  4. Trend of Halogen Free Printed Wiring Board Materials
    Tetsuaki Suzuki, Toshiba Chemical, Japan

13:40-15:20

Special Theme 9-4-2: Advanced Technology for Electronic Packaging: JIEP Session (2)

  1. Development of Formaldehyde Free Electroless Copper Plating Solution
    Takeyuki Itabashi 1 , Haruo Akahoshi 1 , Tadashi Iida 1 , Eiji Takai 2 , Naoki Nishimura 2 , 1 Hitachi Printed Wiring Board Solutions Co. , 2 Hitachi , Japan
  2. Low Distortion Cold Rolled Clad Sheets for Mounting Material
    Shinji Ozawa, Kazuo Yosida, Hiroaki Okamoto, Kinji Saijo, Toyo Kohan, Japan
  3. High Sensitivity Dry Film Photoresist for Laser Direct Imaging System
    Teruhiro Uematsu, Tokyo Ohka Kogyo, Japan
  4. New Halogen-Free High Elastic Moduls Build-Up Material
    Nobuyuki Ogawa, Hitachi Chemical, Japan
  5. Ball Semiconductor Process and Material
    Masataka Yoshida, Masataka Yoshida Ball Semiconductor, Japan

 

Room 5

9:20-11:00

Special Theme 8-4-1: EcoDesign and Chemical Engineering (1)

  1. Eco-Design of Water Purification Equipment for Domestic Use
    Kensaku Mizoguchi1 , Hideya Kamikawa2 , 1 Shizuoka Univ., 2 Yamaha Motor, Japan
  2. Filtration Behaviors in Microfiltration with Periodic Backwashing of Secondary Municipal Wastewater
    Than Ohn 1 , Mohammad S. Jami 2 , Yasuhito Mukai 2 , Eiji Iritani 2 , 1 Aichi Science and Technology Foundation , 2 Nagoya Univ. , Japan
  3. Life Cycle Inventory Analysis of Waste Oil in Japan
    Chie Nakaniwa1 , Yoshie Yagita2 , Atsushi Inaba3 , 1 Yale Univ., USA, 2 Ochanomizu Univ., 3 National Inst. of Advanced Industrial Science and Technology, Japan
  4. Development of a Life Cycle Inventory Database for Chemical Products
    Kiyotaka Tahara, Atsushi Inaba, National Inst. of Advanced Industrial Science and Technology, Japan
  5. A Method to Evaluate Regional Material Flow for Designing Recycling Society
    Koichi Fujie1 , Naohiro Goto1 , Tomotaka Usui2 , 1 Toyohashi Univ. of Technology, 2 Aichi Science and Technology Foundation, Japan

11:20-12:40

Special Theme 8-4-2: EcoDesign and Chemical Engineering (2)

  1. Decomposition Mechanism of Epoxy Resin in Nitric Acid for Recycling
    Weirong Dang 1 , Masatoshi Kubouchi 1 , Shurou Yamamoto 1 , Hideki Sembokuya 1 , Kazuyoshi Arai 2 , Ken Tsuda 1 , 1 Tokyo Inst. of Technology, 2 Hosei Univ. , Japan
  2. Plastic Recycling with Supercritical Fluids
    Izumi Okajima, Takeshi Sako, Shizuoka Univ., Japan
  3. For Building Eco-Industrial Society Originating in Chubu (Central Japan) (Keynote)
    Yoshihiro Yasui , Environmental Partnership Organizing Club (EPOC) , Japan

13:20-15:20

Special Theme 8-4-3: EcoDesign and Chemical Engineering (3)

  1. A New Program for Integrated Recycle System of Chemical Products
    Kensaku Mizoguchi 1 , Youji Akiya 2 , Toshiaki Ito 3 , Junjiro Kawasaki 4 , Yoshiyuki Hashiguchi 5 , Yasushi Hirata 6 , Minoru Nomura 7 , Kiyomi Imou 5 , Akira Kanai 7 , Masahito Sato 2 , Shigeru Matsumoto 8 , Ken Kataoka 9 , 1 Shizuoka Univ., 2 AIST, 3 Mitsubishi Heavy Ind., 4 Tokyo Inst. of Technology, 5 KANEKA, 6 Bridgestone, 7 JCII,8 Tohoku Univ., 9 Daceil Chem. Ind. , Japan
  2. Technological Information Infrastracture for Design and Operation of Recycling Systems
    Yuji Naka 1 , Atsushi Aoyama 1 , Rafael Batres 1 , Akio Shimizu 1 , Kazuhisa Hamada 2 , Katsuyoshi Kameda 2 , Takashi Kagiyama 2 , Iwao Matsumoto 2 , Masahiko Hirao 3 , Hirokazu Hayashi 4 , Atsushi Inaba 5 , 1 Tokyo Inst. of Technology, 2 Japan Chemical Innovation Inst., 3 The Univ. of Tokyo, 4 The Society of Chemical Engineering of Japan, 5 National Institute of Advanced Industrial Science and Technology , Japan
  3. Gasification of Organic Waste Materials (OWM) for Power Generation
    Using Fuel Cell
    Michihiko Hamai 1 , Motohiro Kondo 1 , Masataka Yamaguchi 1 , Guilin Piao 2 , Yoshinori Itaya 3 , Shigekatsu Mori 3 , 1 Toyota Motor, 2 Aichi Science & Technology Foundation, 3 Nagoya Univ. , Japan
  4. Double Coated Adhesive Tape for Recycle Application
    Koichi Ikeda, Kazuhiko Shibata, Nitto Denko, Japan
  5. Considerations of Process Flexibility in Design of Chemical Processes for Satisfaction of Economic and Environmental Objectives (Keynote)
    Jim Petrie 1, 2 , Brett Alexander 2 , 1 Univ. of Sydney , Australia , 2 Univ. of Cape Town , South Africa

 

Room 6

10:20-11:40

Special Theme 2-4-1: Promotion of DFE (1)

  1. Creating Business Value by Linking Industrial Ecology with Business Strategy and Product Design (Keynote)
    Patrick Eagan, Mark Finster, Dennis Hussey, Univ. of Wisconsin-Madison, USA
  2. An Outline of Activities by the Committee of Design for Environment (DfE), Japan, 1994-2001
    Shinzo Omi1 , Mamoru Morimoto2 , Shigeru Suda2 , 1 Tokyo Univ. of Agriculture and Technology, 2 Japan Environmental Management Association for Industry, Japan
  3. Quality Function Deployment for Environment: QFDE (1st Report) -- A Methodology in Early Stage of DfE
    Keijiro Masui1 , Tomohiko Sakao2 , Atsushi Inaba1 , 1 National Inst. of Advanced Industrial Science and Technology, 2 Mitsubishi Research Inst., Japan

12:00-12:40

Special Theme 2-4-2: Promotion of DFE (2)

  1. Quality Function Deployment for Environment: QFDE (2nd Report) -- Verifying the Applicability by Two Case Studies
    Tomohiko Sakao1 , Keijiro Masui2 , Mitsuru Kobayashi3 , Seiichi Aizawa4 , Atsushi Inaba2 , 1 Mitsubishi Research Inst., 2 National Inst. of Advanced Industrial Science and Technology, 3 Shinko Electric, 4 IIYAMA Corp., Japan
  2. Environmental Effect Analysis -- How Does the Method Stand in Relation to Lessons Learned from the Use of Other Design for Environment Methods Mattias Lindahl, Univ. of Kalmar, Sweden

 

14:00-15:20

Special Theme 5-4: Recycling of Individual Products
(Current and Future)

  1. Towards Inverse Production Life Cycle Design: A Simulation Tool Linking Mass Products Recycling to Environmental Legislation and Market
    Francesco Jovane1 , Roberto Bosani1 , Lorenzo Castelli2 , Fabio Salsa1 , 1 Italian National Research Council, 2 Univ. of Trieste , Italy
  2. The QWERTY Concept, A Powerful Concept for Evaluating the Environmental Consequences of End-of-Life Processing of Consumer Electronic Products
    Jaco Huisman 1 , Toon Anscms 2 , Lourens Feenstra 2 , Ab Stevels 3 , 1 Delft Univ. of Technology, 2 TNO Environment, Energy and Process Innovation, 3 Royal Philip Consumer Electronics , The Netherlands
  3. Some Obervations on Recycling of Electrical Home Appliances Activities in Taiwan
    Jahau L. Chen, National Cheng Kung Univ., Taiwan
  4. Waste Utilization by Melting and Crystallization Technology
    Takumi Kaneko, Jun Mochizuki, Hisashi Endo, Tsukishima Kikai, Japan

 

International Conference Room, 7F

15:40-16:30 Plenary III

Designing `Sustainable' Product/Service Systems
John Ehrenfeld, Organizing Committee Co-Chair/ISIE/MIT Technology, Business and Environment Program , USA

16:30-16:45 Best Paper & Best Poster Awards

16:45-17:15 Closing Lecture

Comprehensive Product Modeling for Designing Life Cycle Scenarios
Fumihiko Kimura, Organizing Committee Co-Chair/The Univ. of Tokyo, Japan

17:15-17:40 Closing Words

Tadatomo Suga, Technical Committee. Chair/The Univ. of Tokyo, Japan

 

(C)1999-2001 Sec, EcoDesign
Web assistance: Business Center for Academic Societies Japan
Contact to nuehara@bcasj.or.jp or haraki@bcasj.or.jp
Contact to WebAdministrator
Last modified on 2001/12/07 18:23GMT+09:00